Are you still seeking a suitable location beacon with sensors for your industrial applications? How about learning more details about our P1 Plus Robust Beacon for having an additional choice? P1 Plus is a Bluetooth LE beacon leveraging the nRF52 series chip and equipped with a temperature sensor and an accelerometer.
We have welcomed the pre-order some time ago. It is encouraging that the P1 Plus has lived up to the expectations of Minew and our customers in real-world applications. It has made full use of its innovation.
“I installed P1 Plus on the wall of my cold storage. I was very satisfied and surprised that it was able to maintain excellent operation in a -15℃ environment”.An anonymous customer recently sent us feedback.
Industrial BLE beacon for cold room
Durability is the nature of the P1 Plus. To perform well in some harsh industrial conditions, such as food storage with ultra-low temperature or some chemical plants with high temperature, the P1 Plus is innovated with extraordinary protection grade and hardware quality.
*P1 Robust Location Beacon, without acceleration & temperature sensors, is also available.
The P1 Plus can tolerate a humid environment.
The P1 Plus is IP68 waterproof, which has been laboratory tested to work in some humid locations. Moreover, the tight sealing of P1 Plus also strengthens its waterproof performance. If you want to use the P1 Plus in a cold room or a freezer, it is just right for you.
Rare shock resistance
P1 Plus is likely to remain intact even if bumped or dropped.
The IK09 level of shock resistance makes the P1 Plus defend against certain collisi
ons or drops during the transportation and storage of materials in the warehousing and logistics industry. The rare shock resistance helps users to control the cost of replacing and maintaining the device.
Temperature monitoring and wide operating temperature
The high precision temperature sensor allows the P1 Plus to monitor the ambient temperature in real-time. Cooperated with the Cloud Platform (further developed by software company), users can remotely monitor the temperature of the venue.
The P1 Plus device itself has a maximum operating temperature range of -40 ℃ to 85 ℃, enabling monitoring of tough environments. The exact temperature range will vary from how the device is developed based on customer requirements as well as how the P1 Plus product is installed.
Keep track of every movement
The P1 Plus is equipped with an accelerometer that makes it possible to monitor the position of tagged items in real-time. When you mount the P1 Plus on your container or storage box, you can get the location of these items according to the development software (provided by the software vendor). The real-time and precise location allows you to optimize space occupancy, material utilization, and prevent asset loss.
P1 version is also available, without temperature sensor and accelerometer.
Multiple and stable mounting options
With two mounting ears, the P1 Plus is designed to facilitate the user to fix the device to the target item with screws for great robustness. For example, on wooden boxes, on walls, on pillars, and much more with a hard surface. Also, the P1 Plus can be fixed directly using double-sided adhesive, providing a solution for some situations where screws cannot be used. It is important to note that the recommended operating temperature range is -40 ℃ to 85 ℃ when using screws, and 10℃ to 75℃ when using double-sided adhesive. This is a technical recommendation in order to effectively use and not to damage the device.
Smart switch preventing accidental shutdown
To prevent the P1 Plus from being accidentally shut down during transit and in actual use, our engineers designed to use the magnetic switch. Simply put the magnetic sheeting close to the device and the blue light will be on for 3 seconds, which means successful turned on. Similarly, hold the magnetic sheeting close to the device, the blue light will be on for 5 seconds for a successful shutdown.
Battery life is what you’ll be surprised
P1 Plus is equipped with an industrial-grade lithium battery with a 1200mAh capacity. The advantage of battery replaceable allows P1 Plus to greatly reduce the operating cost for users. There is no need to replace the entire device but the battery to extend the life of the device. The default battery life is up to 44 months, providing endurance support for more possibilities. A flashing red light means low battery and remains users to replace the battery in time to avoid losses due to power depletion.
You can also configure more about the P1 Plus based on our provided App SDK. Make it yours.
The value that the P1 Plus can provide to businesses and the specific scenarios in which it can be used can be viewed in our another article, A Latest Location Beacon – P1 Plus, Made for Durability. Or you can also browse directly to the Industrial Grade Bluetooth Beacon P1 Plus details, which also displays information on how it works and its parameters. You can order the P1 Plus now. So, why not find a trustworthy Bluetooth LE beacon for your special and tough applications as soon as possible?
Get your FREE IOT solution consultation
Pay attention to privacy, and we also welcome your friendly exchanges.
- AoA Gateway
- AoA location beacon
- Beacon Bluetooth 5.0
- Beacon Sensor
- BLE IoT
- BLE Sensor
- BLE Sensor Tag
- Bluetooth 5.0
- bluetooth beacon
- Bluetooth Gateway
- bluetooth indoor positioning
- Bluetooth Location Tags
- Bluetooth sensor
- Bluetooth sensor beacon
- Card Beacon
- Door Sensor
- Emergency Button
- Indoor Beacon
- Indoor Navigation
- Indoor Positioning
- Industrial Bluetooth Beacon
- Infrared Sensor
- IoT device manufacturer
- IoT Product Development
- Location Beacon
- LoRa Technology
- LoRaWan Gateway
- modern healthcare
- Optical Sensor
- sensor tag
- Smart IOT solution
- temperature and humidity sensor
- UWB Tracking Tag
- Wearable Beacons
- WiFi IoT