What is the G1 gateway’s scanning accuracy, and how many tags can it handle? उदाहरणका लागि, can it accurately scan and upload 1,000 tags in a room within 5–10 minutes?
The G1’s scanning performance depends on the tags’ broadcast power and interval—higher settings improve detection but increase power use. In good conditions, all tags can be scanned. With many BLE tags, channel congestion may cause random packet loss, which can be mitigated by adjusting channels, intervals, and filters.
For the G1-E gateway, if both Ethernet and Wi-Fi are available, which network is used by default? Can it automatically switch between them to maintain connection?
The G1-E gateway does not support using Ethernet and Wi-Fi simultaneously. Only one can be active at a time. यद्यपि, when using Wi-Fi, it supports failover between different Wi-Fi networks if their passwords are preconfigured.
Why does the G1-E give error code 671 when trying to get historical temperature data from an MST03 device?
Error code 671 means the gateway can’t connect to the device. This can happen for several reasons:
(1) The MST03 is too far from the G1-E, so the connection fails.
(2) The MST03 has too much historical temperature data stored, which can cause it to disconnect when the gateway tries to retrieve the data.
(3)The command sent over MQTT has an incorrect password or the wrong MAC address.。
Does upgrading from legacy G1 gateway to G1-E-grapes gateway require reworking data protocol compatibility?
Customers who have already integrated the old G1 gateway can easily integrate the G1-E-grapes gateway, as it supports the same data formats (binary, JSON-LONG, JSON-SHORT). यद्यपि, it's recommended to review the new gateway's data parsing documentation for helpful new features.
For new customers or those updating, we offer the JSON-PREPARSED format, which ensures better compatibility and easier configuration with our latest devices.
Which reporting protocol is recommended for the G1-E-grapes gateway?
JSON is the most widely adopted protocol for our G1 gateway. Among available JSON formats, JSON-PREPARSED is strongly recommended due to its unmatched compatibility with broadcast frame parsing and highly intuitive configuration options.
When viewing the raw data of Beacons uploaded by the gateway on the server, does the timestamp represent when the gateway detected the Beacon or when it uploaded the data?
The timestamp reflects the exact moment the gateway detected the Beacon. This means the timestamp can be used to locate and track when/where a Bluetooth device appeared at a specific time.
Can the G1-E-Grapes Gateway’s BLE connectivity function connect to smartphones?
The gateway's BLE capability is designed for configuring and collecting data from beacons/sensors, not available for mobile phone interaction. While smartphone connectivity isn't currently supported, we welcome discussions about custom solutions for specific use cases.
Can the G1 gateway upload data to a local server?
हो, it can. The server and gateway need to be on the same local network and properly configured. उदाहरणका लागि, when setting up a server on a PC, the server’s IP address will be the static IP of the computer's network interface. It is recommended to configure the static IP of the gateway and the computer’s network interface to be within the same network segment.
How to solve the TCP packet sticking problem with the G1 gateway?
This requires the customer to extract the JSON content based on the specific format. If it is not yet a complete JSON format, it will need to continue to be retrieved.
Does the G1-E gateway support remote batch configuration via the network?
हो, our gateway supports receiving and executing preset commands. साथै, we have developed two tools for batch configuration of the gateway via MQTT server and local area network, both of which are available for customer.
तपाइँ किन कन्फिगरेसन पृष्ठ पहुँच गर्न सक्नुहुन्न 192.168.99.1 G1-E को?
तपाईंले पहिले पासवर्ड सेट गर्नुभएको हुनाले यो सम्भव छ, र तपाईंको ब्राउजरले पुरानो लगइन जानकारी क्यास गरेको छ. कृपया आफ्नो ब्राउजर क्यास खाली गर्ने प्रयास गर्नुहोस् र फेरि लग इन गर्नुहोस्.
धेरै गेटवेहरूले कसरी बल्कमा आदेशहरू पठाउन र प्राप्त गर्न सक्छन्?
तपाइँ विषयहरूको लागि निम्न ढाँचा प्रयोग गर्न सक्नुहुन्छ: /gw/अंगूर/स्थिति, /gw/अंगूर/कार्य, /gw/ac233fc1772b/प्रतिक्रिया. जब कुनै विषयलाई आदेश प्रकाशित गरिन्छ, सबै गेटवेहरूले यसलाई एकैसाथ कार्यान्वयन गर्नेछन्. कुन गेटवेले जानकारी फिर्ता गरिरहेको छ भनेर पहिचान गर्नको लागि प्रतिक्रियालाई विषयद्वारा फरक गर्न सकिन्छ.
के G1 IoT ब्लुटुथ गेटवेले HTTP/MQTT नेटवर्क प्रोटोकलहरूलाई समर्थन गर्दछ?
G1 गेटवे दुबै MQTT र HTTP नेटवर्क प्रोटोकल समर्थन गर्दछ, तपाईंलाई आवश्यक रूपमा छनौट गर्न अनुमति दिँदै.
G1 IoT ब्लुटुथ गेटवे मार्फत प्राप्त डाटा किन ढिलो देखिन्छ?
G1 गेटवेले पूर्वनिर्धारित रूपमा प्रत्येक सेकेन्डमा बीकनको प्रसारण डेटा अपलोड गर्दछ, जसलाई a को रूपमा बुझ्न सकिन्छ "ढिलाइ।" तपाइँ कन्फिगरेसन पृष्ठमा अपलोड अन्तराल कम गर्न सक्नुहुन्छ.
किन G1 IoT ब्लुटुथ गेटवेले Azure IoT हबमा सफलतापूर्वक जडान गरेपछि रिपोर्ट गरिएको डेटा प्राप्त गर्न असमर्थ छ??
Azure IoT हबसँग D2C डाटा प्याकेट आकार सीमा छ.
कृपया यहाँ जाँच गर्नुहोस् तपाईंको सेवा प्रभावित भएको छ कि छैन भनी हेर्न र प्लेटफर्म आवश्यकताहरू पूरा गर्न G1 गेटवे प्याकेट आकार समायोजन गर्नुहोस्.
के G1 IoT ब्लुटुथ गेटवे LTE राउटरको WiFi मा जडान गर्न समर्थन गर्दछ?
G1 गेटवेले LTE पोर्टेबल वाइफाइ मार्फत हटस्पटहरूमा जडान गर्न सक्छ, प्रमाणीकरण चाहिने बाहेक. गैर-प्रमाणित WiFi को लागी, सुनिश्चित गर्नुहोस् कि तपाइँ गेटवेमा जडान गर्न सही चरणहरू पालना गर्नुहुन्छ.
के G1 IoT ब्लुटुथ गेटवे वाइफाइ समर्थन गर्दछ 6 (IEEE 802.11ax)?
G1 ले WiFi सम्म समर्थन गर्दछ 4 र वाइफाइ समर्थन गर्दैन 6. यद्यपि, धेरै जसो राउटरहरू ब्याकवर्ड मिल्दो छन्, त्यसैले हाम्रो गेटवे WiFi मा जडान हुन सक्छ 6 राउटरहरू तर WiFi प्राप्त गर्दैन 6 गतिहरू.
अहिले च्याट गर्नुहोस्
इमेल
