This product was successfully added to cart!

Bluetooth 5.0 Wifi Gateway

G1 is a Bluetooth 5.0 low energy (BLE) to Wi-Fi/ethernet connectivity gateway without the uses of smartphones or apps. The G1 gateway collects the data from iBeacon, Eddystone, BLE sensor and other BLE devices and then sends to the local server or remote cloud server by MQTT / MQTT over SSL/TLS /HTTP/HTTPS protocol over Wi-Fi / Ethernet / External 3G / 4G USB Dongle.The user is easy to configure the G1 gateway via a very simple web UI and support batch configuration.



Specification

General: 

● Connect to the Cloud with 3G/4G USB Dongle
● Data Saved in TF Data Card or Udisk
● Support AWS/Azure/ARM mBed Iot Cloud
● Input with DC 5.0V, 1A, Micro-USB
● Firmware Upgraded by OTA
● Support HTTP(SSL/TLS)/MQTT(SSL/TLS & Proxy)/TCP
● Operating Temperature: -25℃ to 65℃
● Batch Configuration Tool Available

 

WIFI & Ethernet: 
● CPU 575MHz 32-bit Application Processor
● 300 Mbps PHY data rate,802.11b/g/n WiFi
● 2 USB 2.0 Host Connectors and 1 TF Card Slot
● 128 Mbyte 16-bit DDR2 RAM
● 16 Mbyte SPI NOR Flash
● RGB LED Strip as the Status Indicator
● OpenWrt, Linux Distribution for embedded Devices
● Support WiFi failover & Mult-Higher Level AP Configuration
● 10/100 Ethernet with 802.3af PoE

 

Bluetooth Low Energy: 
● 64MHz 32-bit Processor
● Built-in Power Amplifier Chip to Precisely Scan BLE
● At Least Bluetooth 4.0(Only for BLE)

Parameters

General Information

 

 Color  White
 Size  150x150x36mm
 Net Weight  180g
 Accessory  1x USB cable, mental fixing and screws
 Power supply (Vcc)  DC 5.0 (+/- 5%) Max. 5.5 Volts
 Storage temperature  -40℃ to 85℃
 Humidity  Max 95%, Non condensing, relative humidity

 

BLE RF Performance

 

 Wireless  IEEE 802.11b/g/n (single stream)
 Data rate  IEEE 802.11b, 1-11Mbps

IEEE 802.11g, 6-54Mbps

IEEE 802.11n(2.4GHz), 7.2-72.2 Mbps

 Frequency band  2.400 – 2.484 GHz
 Number of selectable Sub channels  14 channels
 Maximum receive input level  - 10dBm (with PER < 8%@11 Mbps)

- 20dBm (with PER < 10%@54 Mbps)

- 20dBm (with PER < 10%@MCS7)

 Minimum receive input level  - 87dBm (typ. with PER < 8%@11 Mbps)

- 70dBm (typ. with PER < 10%@54 Mbps)

- 70dBm (typ. with PER < 10%@MCS7)

 Transmit Power  17dBm (typical)@ 802.11b

11.3dBm (typical)@ 802.11g

8.2dBm (typical)@ 802.11n

 Range  up to 90 meters( in open space)

 

BLE RF Performance

 

Item  Parameters
 RF Power Accuracy  +/- 4 dB
 Receiver Sensibility  -108 dBm @250kbps, 0.1% BER

-93 dBm @1Mbps, 0.1 %BER

 Maximum Received Signal Strength at <0.1% PER  0dBm
 Frequency Deviation  +/-250 kHz @BLE
 Scanning & concurrently process  300 BLE packets per second
 Range  up to 300 meters in open space

Contact us

  • captcha  Verification Code
    WhatsApp Online Chat !